Do you know why the new hotel linen bedding must be treated with water first?

       This knowledge point is the same as that of clothes. Newly bought clothes also need to be watered before they can be used. Many people have not developed this habit. I hope everyone can use it in accordance with this method to make it healthier.

       do you know? The bedding or clothing fabrics we buy need to go through processes such as cooking, rinsing, and dyeing. Each of these processes will inevitably deal with chemical agents; therefore, there are several indicators for bedding or clothing to be strictly evaluated to ensure consumers’ Safe and healthy.

       Excessive PH value will irritate the skin

       PH value is also called pH value. Human skin or metabolites also have PH value. Generally speaking, the surface PH value of human skin is about 5.0~7.0; if you buy clothes or bedding fabrics, the PH value and skin PH value If the difference is too large, it will irritate the skin and cause itching.

       Therefore, at this time, in order to ensure health and safety, we need to clean the water first, because the pH value will be neutralized after the water is over, which effectively avoids this situation. Of course, when buying products, you also need to buy products of good quality, rather than insurance.

       Excessive formaldehyde content induces diseases

       We all know that it takes half a year for the house to be renovated inside the house. The reason is that the smell of formaldehyde after the decoration can cause leukemia. We only need to smell this situation. But tell everyone that the formaldehyde content of the fabric is not smelled with the nose, and the detection method is completely different.

       Cut the fabric into small pieces, place it in the test solution and shake for a long time, and then extract the formaldehyde content from the solution. The national standard requires no more than 75mg, and high-quality companies can achieve zero content or less than 30mg. Formaldehyde can cause dermatitis or respiratory diseases.

       Because we don’t know what kind of fabric has an excessive formaldehyde content, the insurance is to throw the fabric into the water and let it pass. Because formaldehyde can also dissolve in water, the formaldehyde content of the fabric after water can generally reach a safe value range. So if you don’t understand, just pass the water first. Among them, the content of white is very low, and the content of formaldehyde used in dyeing chemical raw materials will be high, so you can choose white or light color.

       The new bedding will prevent fading after passing the water

       Many people report that dark products, especially red, blue, etc. fade very badly, so the red quilt cover we buy can easily stain the quilt inside, and some will stain the white bed red. Generally in this case, it is caused by not taking the water method first.

       Because the fabric will generally leave floating color on the surface after dyeing, if you don’t pass the water first, it is very easy to cause color fading. We have tested it before, but the color fastness of the water and the water can be about 2 levels; In the determination of color fastness, this difference is very big.